IMPORTANT SAFETY INSTRUCTIONS
When using a Pet Incubator, basic precautions should always be followed to reduce the risk of fire, electric
shock, and injury to persons, including the following:
1. Read all instructions before installing or using this pet incubator.
2. The Pet Incubator is FOR INDOOR USE ONLY.
3. Extreme caution is necessary when any pet incubator is used by or near children or invalids and whenever
the pet incubator is left operating and unattended.
4. Do not operate any pet incubator after it malfunctions. Disconnect power at the service panel and have
the pet incubator inspected by a reputable electrician before reusing it.
5. To disconnect the pet incubator, turn the controls off, and turn off the power to the pet incubator circuit
at main disconnect panel (or operate internal disconnect switch if provided) and remove the plug from
the outlet.
6. Do not insert or allow foreign objects to enter any ventilation or exhaust opening as this may cause an
electric shock or fire, or damage the pet incubator.
7. To prevent a possible fire, do not block air intakes or exhaust in any manner.
8. A pet incubator has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint, or
flammable vapors or liquids are used or stored.
9. Use this pet incubator only as described in this manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or injury to persons.
10. DO NOT alter the pet incubator or cord in any way. This greatly increases your risk of fire and/or injury.
11. Any alterations to the pet incubator, pet incubator parts, or cords will void all warranties.
12. Dutiful compliance with regular maintenance is required for safe and effective operation.
See "CLEANING AND MAINTENANCE" for further details.
01
www.turbro.com