This appliance is intended for use at a maximum
altitude of 2000m above sea level.
IMPORTANT WARNING
- This device is intended solely for domestic use.
- Before connecting the product to the mains, check that your mains voltage is the same as
or is within the limits indicated on the product label. Keep this appliance out of the reach of
children and people with disabilities. - Do not move the device while in use. Do not leave the
power on if you will not be in the same room where the appliance is. Keep the appliance clean.
Do not allow any object into the ventilation system as it could cause an electric shock, fire
or damage the unit.- Do not use the appliance to dry clothes. Do not use the heater in the
immediate surroundings of a bath, a shower or a swimming pool. - Always use the device in
an upright position. Unplug the unit whenever not in use. Do not pull the cord to unplug the
appliance. Do not use the device if it is cracked or broken. - Do not use the appliance in rooms
with a surface less than 4m2. - The appliance has a security system to be disconnected in case
of accidental overheating. To keep the unit working again unplug the power for a few minutes,
check that has no object obstructing the air inlet, let the device cool down and plug it back.
- Improper use of the product may involve danger and revoke the warranty and liability
Do not use, connect or disconnect the device to the network with wet hands and/or feet.
- Do not wrap the cord around the control button.
B&B TRENDS SL accepts no liability for any damage that may be caused to people, animals
or objects owing to failure to observe this warning correctly.
TECHNICAL PARAMETERS
Model
Specification
Antares 1000
Antares 1500
Antares 2000
Antares 2500
METHOD OF USE
1. Open the packing box, take out the body and confirm whether the product is intact.
2. Before use, please make sure that the rated voltage of the power socket is 220-240V AC, the
rated current is greater than 15A and there is a reliable and safe grounding device.
3. The electrical oil heater can only be used after the casters are properly installed. Refer to
Caster Installation Method.
4. Method of using the type:(1) Rotate the thermostat clockwise to the top
Voltage
5 fins
220-240 V
7 fins
220-240 V
9 fins
220-240 V
11 fins
220-240 V
Frequency
I
50-60 Hz
400 W
50-60 Hz
600 W
50-60 Hz
800 W
50-60 Hz
1000 W
II
III
600 W
1000 W
900 W
1500 W
1200 W
2000 W
1500 W
2500 W
21
