Left Blade Motor Controller Error Code - GreenWorks Commercial CZ48R18X Manual Del Operador

EN

14.6 LEFT BLADE MOTOR CONTROLLER ERROR CODE

Error Codes Error Contents
ML 11 Left Blade Motor Controller
Hardware Overvoltage or
Overcurrent
ML 12 Left Blade Motor Controller
Overcurrent
ML 13 Left Blade Motor Controller
Overvoltage
ML 14 Left Blade Motor Controller
Undervoltage
ML16 Left Blade Motor Phase
Open
ML 17 Left Blade Motor Controller
Severe Overtemp
ML 18 Left Blade Motor Controller
EEPROM Abnormal
ML 21 Left Blade Motor Stall De-
tected
ML 22 Left Blade Motor System
Start Failure
ML 23 Left Blade Motor Controller
Precharge Failed
ML 24 CAN Communication with
Right Wheel Motor Control-
ler Abnormal
ML 26 Left Blade Motor Controller
MOSFET Abnormal
English
User's Operation Suggestions
1. Please reduce the load.
2. Please restart the vehicle.
3. Please check if there is short circuit of left blade motor phase wires
U, V and W.
1. Please reduce the load.
2. Please restart the PTO switch.
3. Please restart the vehicle.
4. Please check if there is short circuit of left blade motor phase wires
U, V and W.
1. Please restart the PTO switch.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please restart the PTO switch.
2. Please check the main fuse.
3. Please check if the output wire of the battery pack is well connec-
ted.
4. Please restart the vehicle.
5. Please contact after-sales service.
1. Please check if the left blade motor phase wire is well connected.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please reduce the motor load.
2. Please check if the phase wires on the left blade motor are well
connected.
3. Please contact after-sales service.
1. Please restart the vehicle.
2. Please contact after-sales service.
1. Please reduce the load on the left blade motor.
2. Please restart the PTO switch.
3. Please check if the left blade motor phase wires are well connected.
4. Please restart the vehicle.
5. Please contact after-sales service.
1. Please restart the PTO switch.
2. Please reduce the load on the left blade motor.
3. Please restart the vehicle.
4. Please contact after-sales service.
1. Please restart the vehicle.
2. Please contact after-sales service.
1. Please check if the CAN communication wiring on the right wheel
motor controller is well connected.
2. Please restart the vehicle.
3. Please contact after-sales service.
1. Please restart the vehicle.
2. Please contact after-sales service.
46