Idiomas disponibles
Idiomas disponibles
5. Install the
front
bezel.
6. Install the
side
cover.
7. Follow the procedure in
Antena SMA
Removing the external SMA antenna kit
CAUTION:
The information in this section is intended for authorized service technicians only.
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch hard drive
5. Remove the
3.5-inch hard drive
6. Remove the
disk-drive
About this task
The following image indicates the location of the external SMA antenna kit and provides a visual representation of the removal
procedure.
Steps
1. Remove the nut and washer from the two antenna heads.
2. Gently pry and remove the antenna heads from the chassis.
After working inside your
Before working inside your
if applicable.
if applicable.
cage.
Extracción e instalación de unidades reemplazables en campo (FRU)
computer.
computer.
85
