Technical Data; Switching On The Sealer; User Interface Of The Base750/Base760 - B.A. International UltraSeal BASE750 Manual Del Usuario

4

3 Technical Data

Rated voltage:
Rated current:
Frequency range:
Rated power input:
mains fuse
Heating circuit fuse (internal):
Motor fuse:
Ambient temperature range:
Storage temperature range:
Humidity:
Protection category:
Electrical safety:
Protection class:
Degree of pollution:
Dimensions (B x H x T):
Weight:

4 Switching on the sealer

Before switching on the sealer, read this manual and the safety instructions!
To switch on the sealer use the switch on the backside of the sealer... This sealer is suitable for 115 and 230 V
current at a net frequency of 50 or 60 Hz...
Some minutes after switching on the sealer it will be ready for use... This can be recognised by a look on the
display and a short beep...

5 User interface of the BASE750/BASE760

The user interface consist of a display, one control lamp, a motor switch and 2 input keys...
The display shows the actual temperature in Celsius or Fahrenheit...
The control lamp shows the status of the sealer... If the lamp is green the temperature is reached, and the sealer
is ready to seal...
With the input keys the set temperature can be adjusted...
115V~ / 230V~ ±10%
0,2 – 6,5A
48 - 62Hz
800 VA
At 115V: T8A
At 230V: T4A
4AT / 250V
0,4A
+15...+30°C
-10 ...+50°C
60% r...F... bei +30°C
IP20
EN 61010-1
I
2
(380 x 100 x 240) mm
7kg
5 x 20 mm
5 x 20 mm
Auto recovery
No condensation!
Motor switch
BASE750/BASE760
Display
Input keys
Control lamp