Idiomas disponibles
Idiomas disponibles
CARTON C ONTENTS
Check carton c ontents against the fol-
lowing list.
Model 358.794744
• Blower
• Upper blower tube
• Lower blower tube
• High velocity
nozzle
• Elbow tube
• Vacuum bag
• Upper vacuum tube
• Lower vacuum tube
• 2-Cycle engine oil
NOTE: It is normal for the fuel filter to
rattle in the empty fuel tank.
ASSEMBLY
,_WARNING:
Stop engine and be
sure the impeller blades have stopped
turning before opening the vacuum
in-
let door or attempting
to insert or re-
move the vacuum tubes. The rotating
blades can cause serious injury.
,_
WARNING:
If you receive
your
unit assembled,
repeat all steps to en-
sure your unit is properly assembled
and all fasteners
are secure.
•
A standard
screwdriver
is required
for assembly.
BLOWER
ASSEMBLY
BLOWER
TUBE ASSEMBLY
If you have already assembled
your
unit for use as a vacuum,
remove the
vacuum
tubes and collection
bag.
1. Align the rib on the upper blower
tube with the groove in the blower
outlet; slide the tube into place.
NOTE: Knob must be loose enough to
allow blower tube to be inserted in blow-
er outlet. Loosen knob by turning coun-
terclockwise.
3,
Align the slots on the lower blower
tube with the tabs on the upper
blower tube.
Upper Blower
Tube
Lower Blower
Tube
Tab
Slot
4. Slide the lower blower tube onto
the upper blower tube.
5. Turn the lower blower tube clock-
wise until a click is felt to secure
the lower blower tube to the upper
blower tube.
NOTE: When the upper and lower
blower tubes are assembled
together
properly, the arrows on both tubes will
be aligned.
6. To remove the tubes, turn the knob
counterclockwise
to loosen the
tubes; remove the tubes.
HIGH-SPEED
NOZZLE
ASSEMBLY
When greater air speed is desired, use
the high-speed
nozzle.
1. Align the slots on the nozzle with
the tabs on the lower blower tube.
_
-'-_,,__
High- Speed
--_ _/'Tf_-_
Nozzle
Lower Blower
Tab/
_
Tube
Slot
._,f
-_
Blower Outlet
'"
",7' '\
Rib
Groove
2.
Secure the tube by turning the
knob clockwise.
2. Slide the nozzle onto the lower
blower tube.
3. Turn the nozzle clockwise
until a
click is felt to secure the nozzle to
the lower blower tube.
VACUUM
ASSEMBLY
VACUUM
BAG ASSEMBLY
1. Open the zipper on the vacuum
bag and insert the elbow tube.
-6-
