Idiomas disponibles
Idiomas disponibles
CUSTOMER
RESPONSIBILITIES
_1, WARNING:
service, or adjustments.
CARE & MAINTENANCE
TASK
Check for loose fasteners and parts
Check for damaged
or worn parts
Inspect and clean unit and labels
Clean air filter
Replace spark plug
Replace fuel filter
Check muffler mounting screws
Disconnect
the spark plug before performing
maintenance,
WHEN TO PERFORM
Before each use
Before each use
After each use
Every 5 hours of operation
Yearly
Yearly
Yearly
WARNING:
Avoid touching
muf-
fler unless engine and muffler are cold.
A hot muffler can cause serious burns.
_ILWARNING:
Stop engine and be
sure the impeller blades have stopped
turning before opening the vacuum
in-
let door or attempting
to insert or re-
move the vacuum
or blower tubes.
The rotating blades can cause serious
injury. Always disconnect
the spark
plug before performing
maintenance
or
accessing
movable
parts.
GENERAL
RECOMMENDATIONS
The warranty on this unit does not cov-
er items that have been subjected
to
operator abuse or negligence.
To re-
ceive full value from the warranty, the
operator
must maintain
unit as instruct-
ed in this manual. Various adjustments
will need to be made periodically
to
properly maintain your unit.
CHECK
FOR LOOSE
FASTENERS
AND PARTS
• Muffler
• Spark Plug Boot
• Air Filter
• Housing Screws
CHECK
FOR DAMAGED
OR
WORN PARTS
Contact Sears Service Center for re-
placement
of damaged
or worn parts.
• Fuel Tank - Do not use unit if fuel tank
shows signs of damage or leaks.
• Vacuum Bag - Do not use vacuum
bag if it is torn or damaged.
INSPECT
AND CLEAN
UNIT
AND LABELS
• After each use, inspect complete
unit
for loose or damaged
parts.
Clean
the unit using a damp cloth with a
mild detergent.
• Wipe off unit with a clean dry cloth.
CLEAN
AIR FILTER
A dirty air filter decreases
engine per-
formance
and increases
fuel consump-
tion and harmful emissions.
Always
clean after every 5 hours of operation.
Button
Air Filter
Cover
/
Air Filter
Cleaning
the air filter:
1. Clean the cover and the area
around it to keep debris from falling
into the carburetor
chamber when
the cover is removed.
NOTE: Move choke lever to RUN posi-
tion before opening air filter cover.
2. Open air filter cover by pushing
button (see illustration).
Remove
air filter.
NOTE:
Do not clean filter in gasoline
or other flammable
solvent.
Doing so
can create a fire hazard or produce
harmful evaporative
emissions.
3. Wash the filter in soap and water.
4. Allow filter to dry.
5. Apply a few drops of oil to the filter;
squeeze
filter to distribute
oil.
6. Replace parts.
-12-
