Idiomas disponibles
Idiomas disponibles
purpose.
•
Temperature stability is very important when storing wine.
•
Exposing your wine cooler to sunlight, significant temperature fluctuations, high
humidity and vibrations may cause the wine to go bad.
•
In periods of high humidity, condensed water vapour may appear on the outer
surfaces of the glass door. To prevent this, install the appliance in a dry, ade-
quately ventilated room.
•
Selected models have an external handle. You need to install it on your own.
Do not use electric tools for this purpose (fig. 3*). To do this, pull the door seal
slightly to the side and place the screws on the inside of the door. Align the
handle with the holes on the outside of the door and tighten the screws with a
screwdriver. Reinstall the door seal.
•
The maximum capacity of the appliance is given in the product sheet enclosed
with the wine cooler. This capacity applies to standard 0.75 litre bottles of Bor-
deaux.
•
Selected models have an Anti-tip kit. Install it according to the enclosed diagram
(fig. 6*).
•
This refrigeration appliance is intended for use as a built-in appliance.
•
To achieve the most effective food preservation for the longest possible time
and to avoid wasting any food, position the products as shown in Figure 12. In
addition, this figure illustrates the layout of drawers, baskets and shelves, which
allows the most efficient use of energy.
•
Optimal temperature and storage conditions will extend product shelf life and
optimize electricity consumption. Optimal storage temperature range should be
stated on the food product packaging.
*According to the model
38
