Create JET WASHER Manual Del Usuario página 7

Hidrolimpiadora a presión
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 17
• Do not use the appliance if a power cable or important parts of the ap-
pliance are damaged, e.G. Safety devices, high pressure hoses, spray gun.
• If the extension cord is used, the plug and socket must be waterproof.
Warning: unsuitable extension cables can be dangerous, if an extension ca-
ble is used, it must be suitable for outdoor use, and the connection must be
kept dry and off the ground. The use of a power cable reel which keeps the
socket at least 60mm above the ground is strongly recommended.
• Switch the appliance off and disconnect it from the power supply before as-
sembly, cleaning, adjustments, maintenance, storage and transportation.
• The electric supply connection must be made by a qualified electrician
and comply with iec 60364-1. Either a residual current device that will cut
off the power supply if the leakage current to earth exceeds 30 ma for 30
ms or a ground fault interrupt device must be installed.
• The washer is not suitable for connection to potable water pipes. Connect
the machine to the water supply.
• Use the device on a flat surface.
• Keep good footing and balance at all times – do not overreach or stand on
an unstable support.
• The work area should have adequate drainage to reduce the possibility of
a fall due to slippery surfaces.
• Do not use the pressure cleaner in areas near combustible materials, com-
bustible fumes, or dust.
• For security reasons, make sure you have a three-month control and main-
tenance. Before use, make sure that the filter and the nozzle are not con-
taminated. After use, make sure there is no water in the pump and hose.
• Overload protection: when the nozzle is stuffed or the high pressure hose
is knotted, the overload protection starts automatically and the machine
is switched off.
• After solving the fault, turn the switch back on and turn the machine back on.
Warning: risk of explosion – do not spray flammable liquids
Warning: high pressure hoses, fittings and couplings are important for the
safety of the machine. Use only hoses, fittings and couplings recommended
by the manufacturer
• Some chemicals or detergents may be harmful if inhaled or ingested
causing severe injury. Use a respirator or mask whenever there is a
chance that vapors may be inhaled. Read all instructions included with
the mask so you are certain the mask will provide the necessary protec-
tion against inhaling harmful vapors.
• Before starting the pressure washer in cold weather, check all of the
parts of the equipment and be sure that ice has not formed. Do not sto-
re the unit anywhere that the temperature will fall below 0 °C (32 °f).
• Do not make any modifications to any of the components! Units with
broken or missing parts, or without the protective housing or covers
should never be operated
• Keep the high-pressure hose connected to the pressure cleaner and
the spray gun while the system is pressurized. Disconnecting the hose
while the unit is pressurized is dangerous, and may cause injury.
• Always turn off the power when the machine is left unattended.
• Keep water spray away from electrical wiring or fatal electric shock
may result.
E NGLI SH
7
loading

Productos relacionados para Create JET WASHER