Idiomas disponibles
Idiomas disponibles
SHU T T IN G DOWN T HE PRE S S URE WASHE R
When finished using the pressure washer, follow these steps to shut down the unit:
• Turn the pressure cleaner to the OFF position, unplug the power cord from the wall outlet.
• Turn off the water supply.
• Before disconnecting the high-pressure hose connection, point the gun in a safe direction
and discharge the remaining water.
• Disconnect the high-pressure hose from the pressure washer and gun.
• Disconnect the garden hose from the pressure washer.
• Remove excess water from the pump by tipping the unit on both sides to drain any remaining
water from the inlet and outlet fittings.
• Remove the water intake filter and flush with water to remove dirt or debris. Replace filter
once cleaned.
• Drain detergent reservoir and flush with running water.
• Wipe away any remaining water on all parts and fittings.
• Engage the gun safety lock.
• Store the pressure washer, its parts and accessories in an area with a temperature above
0 °C (32 °F).
W INTE R IZ I N G A ND LO NG-T E RM STO R AG E
Follow all of the above shut-down procedures, adding the following steps:
• After disconnecting the water supply, and before disconnecting the high-pressure hose, turn
the pressure washer on for 2-3 seconds, until any remaining water in the pump is removed.
Turn the unit off immediately.
• Always store the pressure washer, its parts and accessories in an area with a temperature
above 0 °C (32 °F).
• Warning: Continued use of the pressure washer without water supply attached will cause
severe damage to the unit. Failure to comply with these storage instructions will result in
damage to the pump assembly.
M A IN TE N AN CE
• This pressure cleaner is supplied with a closed lubrication system, so no addition of oil is
needed.
• Check all hoses and accessories for damage prior to use.
• Check the inlet filter periodically for deposits. Clean this filter regularly for maximum per-
formance.
E NGL I SH
14
CLEANING AND MAINTENANCE
