Idiomas disponibles
Idiomas disponibles
Pin Assignment
Follow the instructions below to connect the SL95 to a computer.
A. Signal connector: 15 pin mini D-Sub (PS / 2 or PC / AT compatible model)
Connect the signal cable to the 15 pin mini D-Sub connector on the display unit.
B. Signal connector: 15 pin D-Sub (Apple computer)
Convert a MAC 15 pin D-Sub connector to a 15 pin mini D-Sub connector using a Panasonic MAC
adapter. and connect it to the 15 pin mini D-Sub connector on the display unit.
< REAR PANEL >
Pin assignments of 15 pin mini D-Sub connector
[REO] LGREEN]
14
*: "VESA"s Display Data Channel (DDC) Standard
OJT
[|
GS
IN |
_
on
C. Signal connector: BNC connector
Sync on green system
Connect the signal cable to RED, GREEN (sync
ongreen) and BLUE BNC connectors.
Composite sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC (H / V composite) BNC connectors.
Separate sync system
Connect the signal cable to RED, GREEN, BLUE
and H-SYNC and V-SYNC BNC connectors.
66666
Note : If your computer's video output is over
110 MHz, it is recommended that it be
External View
used with the BNC connectors.
Dimensions
Width
:
448 mm (17.6")
Height
:
454 mm (17.9")
Depth
:
415 mm (16.3")
Base diameter
: 9 255 mm (0 10.0")
Height without stand:
412.5 mm (16.4")
Pan / Tilt range
Up
: 13 degrees
Down
:
4 degrees
Left, right
: 90 degrees each
