Idiomas disponibles
Idiomas disponibles
Adjustments (Continued)
Adjustment menu
Note: If the [4 and BP] keys are pressed at the same time, the standard level
(50) will be set.
Color Temp : itis possible to switch the whiteness of the image.
1) Press the [4 and È) keys to select 1 (9300 K + 8 MPCD) / 2 (7500 K) /
3 (6500 K) / 4 (5000 K) / 5 (9300 K + 27 MPCD) / 6 (User).
2) (2] will be displayed at the bottom right-hand side of the on-screen
panel when 6 (User color) has been selected. Press the [2] key on
the front operation area to enter the User color adjustment screen.
User : itis possible to adjust the whiteness of the image to suit personal
preference.
i
1) Select R (red), G (green), B (blue) with the [2] key.
2) Adjust the color to match personal preference with [4 and B®] keys.
* As user colors cannot be recalled, take note of the set values
beforehand.
©
Recall : It is possible to return to the initial settings (the settings at the time of factory
shipment).
1) When the [1] key (Yes) is pressed, the settings are recalled and the menu
screen returns. (Recall = return to initial settings (settings at time of factory
shipment))
2) When the [2] key (No) is pressed, the menu screen returns without the settings
being recalled. (The settings return to what they were immediately before the
recall.)
If there are no operations performed for about 30 seconds, the screen goes off
without a recall.
Either 0.7 V or 1.0 V can be selected with the [2] (0.7 V / 1 V) key.
Use 0.7 V under normal condition.
Moire reduction
: Moire patterns are caused by interference of the CRT dot pitch and video
signal due to the resolution of the input signal, video pattern, etc., producing
patterns of horizontal stripes (Horizontal moire pattern) or vertical stripes
(Vertical moire pattern).
vertical line stability, etc.) will sometimes be affected...
AAR
H. Moire
: The moire correction circuit can be switched On and Off with the [2] key.
When the moire correction circuit is switched On with the [2] (On / Off) key, the
adjustment screen menu appears.
Adjust with the [4 and >] keys so that the striped moire pattern is in its optimum
condition.
>38 V. Moire : The moire correction circuit can be switched On and Off with the [Z] key.
When the moire correction circuit is switched On with the [2] (On / Off) key, the
adjustment screen menu appears.
Adjust with the E8 and BP) keys so that the striped moire pattern is in its optimum
condition.
T
u)
mal
O
a
Ww
11
