Amana ND-1 Guía De Uso Y Cuidado página 5

Ocultar thumbs Ver también para ND-1:
Idiomas disponibles

Idiomas disponibles

Cycles and options may vary by model.
Jr Li_:_ht _,_ g;yclss
Off
Auto Dry
More
Dry Dry
Down
Off
NO Iron Fabrics
Auto Dry
off
Regular
cool a own
bees
Dryo
More
Dry°
off
Cool Down
I0
Time Dry/Air
Fluff
This cycle can be used to regulate the drying time. Use
with Air Fluff, Delicate, Medium
(select models) or
Regular temperature
settings. For timed drying, turn
the control dial until the pointer points to the proper
time setting in the Time Dry/Air
Fluff cycle.
I Note:
Using the Air Fluff temperature
setting will
require a longer drying time.
Damp Dry
Damp Dry is located on the Time Dry/Air Fluff section
of the dial. It is designed to partially dry items and can
be used with any temperature
selection. Damp Dry will
provide 20 minutes of tumbling
time, followed
by
10 minutes of cool-down
tumbling.
Touch Up/Refresh
Touch Up/Refresh
will release wrinkles
from items that
are clean and dry but only slightly wrinkled,
such as
from a crowded closet or suitcase, or from sitting in
the dryer too long after the cycle has ended. Touch
Up/Refresh
provides 10 minutes of tumbling
followed
by 10 minutes of cool-down
tumbling
and can be used
with any temperature
selection.
Push the Control Dial in
to Start
Push the control dial in to start the dryer. The dryer
door must be closed for the dryer to start.
Note:
The dial can be turned
in either direction
to
select a cycle. Once started, the dial will not
advance at a specific rate during the Auto Dry
cycles. At first the dial may not advance at all.
Toward the end of the cycle (when the load begins
to dry), the dial will advance at a more regular rate
and much more quickly. This is normal operation.
loading