Troubleshooting - DeWalt DXH2000TS Manual De Instrucciones

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

Note: Your heater is equipped with auto cool down and warm-up features.

AUTO COOLDOWN.

When the heater is running and the selector switch is rotated to the off position,

the heater will automatically keep the fan operating until the heater is cool. The

fan will then shut off.

AUTO WARM-UP.

When the heater is stored or started in very cold conditions and a heating mode

is selected, the heating element will turn on to warm up the unit before the fan

will start to blow hot air.

WARNING: USE ONLY MANUFACTURER'S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. RE-

PLACEMENT PARTS ARE ONLY AVAILABLE DIRECT FROM THE FACTORY AND MUST BE INSTALLED BY A QUALIFIED SERVICE AGENCY.

Unit does not work

Unit runs continuously

Elements are on but motor does not rotate

Enclosure is extremely hot

Desired room temperature cannot be reached

Overheating

Heater emits a humming sound

Storage

When not in use, the heater must be disconnected from power source, dusted off and the cord should

be loosely wound around the handle.

For service :

Please call Toll-Free 855-805-5745 www.dewalt.com

Our office hours are 8:00 AM – 5:00 PM, EST, Monday through Friday.

Please include the model number, date of purchase, and description of problem in all communication.