DeLonghi Dedica Arte EC885.GY Instrucciones página 9

5. PROGRAMMING THE QUANTITIES OF COFFEE IN THE CUP
The machine is set by default to automatically deliver standard quantities. To change these quantities, proceed as follows:
1. Place one or two cups
under the portafilter
spouts.
Default
quantity
35 ml
(1.18 fl oz)
70 ml
(2.37 fl oz)
6. MAKING CAPPUCCINO
1. To use tall glasses, re-
move the drip tray (A9)
and stand the glasses on
the glasses tray (A10)
Tips for best results:
• Recommended milk quantity for cappuccino: 100 ml/ 3.5 fl oz.
• For a denser more even froth, you must use milk at refrigerator temperature (about
5°C/41°F).
• When steam is ready, before frothing milk, position an empty container under the
frother and open the dial for a few seconds to eliminate any air left in the circuit.
Close the dial again and proceed.
1
2. Press and hold the
button you want to
programme (
).
Programmable quantity
from ≃15 to ≃90 ml
(from ≃0.51 to ≃3.04 fl oz)
from ≃30 to ≃180 ml
(from ≃1.01 to ≃6.09 fl oz)
1
2. Prepare the espresso cof-
fees as described in the
previous sections, using
sufficiently large cups.
2
3. The coffee maker starts
delivering coffee and
the other coffee button
or
flashes to indicate that
the machine is in pro-
gramming mode.
2
3. Fill a milk pitcher with
fresh cold milk. Milk will
up to triple in volume.
8
3
4. Once the required quantity
of coffee has been deliv-
ered into the cup, release
the button. Delivery stops
and the light flashes to
indicate that the quantity
has been saved correctly.
3
4. Press the
The light flashes. When
the light comes steady, the
appliance is ready to deliv-
er steam.
4
4
button.