Idiomas disponibles
Idiomas disponibles
INSERT
CABLE
CLIP
• Insert plastic cable clip into hole on the
back of handle column.
Push cables
into clip.
Handle Column
Hairpin
Shift Rod
Shift Lever
Indicator
Cables
Cable Clip
CONNECT
SHIFT ROD
1. Insert end of shift rod farthest
from
bend into hole of shift lever indicator.
2.
Insert hairpin clip through hole of shift
rod to secure with bend of clip on right
side.
LAttach
this End To shift _
Shift Rod
Lever Indicator
REMOVE TILLER FROM CRATE
1. Adjust
handle assemby
to lowest
position.
Be sure lock lever is tight-
ened
securely.
2.
Make sure shift lever indicator
is in "N"
(neutral)
position.
3. Tilt tiller forward
by lifting handle.
Separate
cardboard
cover from
leveling
shield.
4.
Rotate tiller handle to the right and
pull tiller out of carton.
CHECK TIRE PRESSURE
The tires on your unit were overinflated at
the factory for shipping
purposes.
Correct
and equal tire pressure
is important for
best
tilling performance.
• Reduce tire pressure
to 20 PSI.
HANDLE HEIGHT
• Handle
height may be adjusted
to
better suit operator.
(See "TO ADJUST
HANDLE
HEIGHT"
in the Service
and
Adjustments
section of this manual).
7
