Beta Motorcycles RR 250 2T 2017 Manual Del Usuario página 138

4
2
GB
KEy TO SymBOlS
ENGiNE Oil
ChECK ThE lEVEl
Hold the vehicle upright.
Position the drive on a flat base ensuring
stability.
Remove the inspection cap 1.
1
The oil level must arrive to the lower edge
of check hole.
Otherwise restore the oil level through
plug 2.
Use the oil indicated on page 16 in
the "Recommended lubricants and liquids"
table.
REplaCEmENT
Always perform the replacement when
engine is hot:
- Position the drive on a flat base ensuring
- Remove the engine casing by loosening
- Place a container under the engine.
48
Tightening torque
Threadlocker Medium
Grease
stability.
the screws shown in the figure.
WARNING:
Hot oil can cause severe burns!