Idiomas disponibles
Idiomas disponibles
3.
LEGO ledninger og stik
Alle elektriske forbindelser til motorer, lyssten og optosensorer sker med almindelige
LEGO ledninger. Ledningerne i dette saet er i begge ender forsynet med specielle LEGO
stik passende til de anforte komponenter samt LEGO interface, m.v. Stikkene er ikke
polede og kan frit vendes efter onske.
Det er muligt at sammensaette flere stik ved anvendelse af sidehulleme.
Direction for use
This LEGO® Technic Control Set contains elements and building instructions specially
developed for use in connection with a micro computer and an interface. To ensure
the correct use of the materials we have stated the conditions under which the compo¬
nents listed below should be used:
1. LEGO sensors
2. 4.5 V DC LEGO motor
3. Leads and plugs
1.
LEGO sensors
the set contains 2 different types of sensors, a touch sensor and an optosensor.
1.1
LEGO optosensor
This sensor has been specially developed for use together with a LEGO Interface. The
optosensor connects to the LEGO Interface by means of an ordinary LEGO lead, plugged
into one of the input sockets marked 7 and 6. The optosensor is able to function as
a reflection sensor - together with the counting disk (revolution counter) as well as
with a yellow brick (position indicator). Furthermore it can be used together with an
external light source, the 4.5 V LEGO light brick1 . When connected the optosensor is
supplied with current from the interface, and functions as a digital sensor registering
the change between light and dark.
Note:
To protect the elettronics the optosensor must not be connected to more than 9 V
DC.
1.2
LEGO Touch sensor
The touch sensor connects to the LEGO
Interface by means of an ordinary LEGO
lead, plugged into one of the input sock¬
ets marked 6 and 7.
When the grey button on the touch sensor
is pressed it makes an audible sound and
the green light on the corresponding input
port is turned on.
4
5
