Bosch HCP3 651UC Serie Manual De Instrucciones página 7

Idiomas disponibles

Idiomas disponibles

State of California Proposition 65
Warnings
WARNING
This product contains chemicals
known to the State of
California to cause cancer, birth defects or other
reproductive
harm.
Causes for damages
CAUTION
Risk of damage due to corrosion.
Always turn
appliance on when cooking to avoid condensation
buildup. Condensation
can lead to corrosion
damages.
Always replace defective bulbs immediately
to avoid an
overload of the remaining
bulbs.
Risk of damage due to ingress of humidity into the
electronic
circuitry. Never clean operator controls with a
wet cloth.
Surface damage due to incorrect cleaning. Clean
stainless steel surfaces in the grind direction only. Do not
use any stainless steel cleaners for operator controls.
Surface damage due to strong or abrasive cleaning
agents. Never use strong and abrasive cleaning agents.
Risk of damage from condensation
back flow. Install
exhaust vent at a slight downward slope away from the
appliance
(1 ° slope).
Protecting the environment
Unpack the appliance and dispose of the packaging
in
line with environmental
requirements.
Operating modes
You can use this appliance
in the air extraction or the
recirculation
mode.
Fan operation
The air that is drawn in is cleaned by
the grease filters and conveyed to the
exterior by a pipe system.
Note: Ventilation may not exit through an already
operational
smoke or exhaust chimney, nor a duct used
for ventilating furnace installation areas.
o If the ventilation is intended to pass through a smoke
or exhaust that is not in operation, the responsible
area heating inspector must give approval.
o If the ventilation passes through an external wall, use a
telescope
wall sleeve.
Circulating-air
mode
The air that is drawn in is cleaned by the
grease filters and an activated carbon filter
and conveyed
back into the kitchen.
Note: To bind odors in circulating-air
mode, you must
install an activated carbon filter. The different options for
operating the appliance
in circulating-air
mode can be
found in the brochure. Alternatively,
ask your dealer. The
required accessories
are available from specialist
retailers, from customer service or from the Online Shop.
The accessory
numbers can be found at the end of the
instructions
for use.
loading