Bosch Professional GSS 140 A Instrucciones De Servicio página 15

c) If the power cord is damaged, the power cord shall be
replaced by manufacturer, service or qualified person to
avoid the risk of electrical shock.
Safety Warnings for Sander
► Use the machine only for dry sanding. Penetration of
water into the machine increases the risk of an electric
shock.
► Caution, fire hazard! Avoid overheating the
object being sanded as well as the sander. Always
empty the dust collector before taking breaks. In
unfavourable conditions, e. g., when sparks emit from
sanding metals, sanding debris in the dust bag, micro
filter or paper sack (or in the filter sack or filter of the
vacuum cleaner) can self-ignite. Particularly when
mixed with remainders of varnish, polyurethane or other
chemical materials and when the sanding debris is hot
after long periods of working.
► Secure the workpiece. A workpiece clamped with
clamping devices or in a vice is held more secure than
by hand.
Products sold in GB only: Your product is fitted with an
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should
be cut off and an appropriate plug fitted in its place by an
authorised customer service agent. The replacement plug
should have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains
socket elsewhere.
Products sold in AUS and NZ only: Use a residual current
device (RCD) with a rated residual current of 30 mA or less.
Functional Description
Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock,
fire and/or serious injury. While reading the
operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for dry sanding of wood, plastic,
filler and coated surfaces.
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics page.
1 Dust box, complete (Microfilter System)*
2 Sanding plate
3 Sanding-sheet clamp
4 Sanding sheet*
5 Release button for front clamping bracket
6 Front clamping bracket
F 000 622 340 | 06.2011
7 On/Off switch
8 Handle (insulated gripping surface)
9 Extraction outlet
10 Latching lever for dust box*
11 Filter element (Microfilter System)*
12 Extraction adapter*
13 Vacuum hose*
14 Perforating tool*
*Accessories shown or described are not part of the standard
delivery scope of the product. A complete overview of accessories
can be found in our accessories program.
Technical Data
Orbital sander
Article number
Rated power input
No-load speed
No-load orbital stroke
rate
Orbit diameter
Sanding sheet
dimensions
— Adhesion via Velcro
backing
— Attachment via
clamping
Sanding plate
dimensions
Weight according to
EPTA-Procedure
01/2003
Protection class
The values given are valid for a nominal voltage [U] of 230 V. For
different voltages and models for specific countries, these values
can vary.
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may vary.
Noise/Vibration Information
Measured sound values determined according
to EN 60745.
Typically the A-weighted noise levels of the product are:
Sound pressure level 82 dB(A); Sound power level 93
dB(A). Uncertainty K=3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745: Vibration emission value ah =6.5
m/s2, Uncertainty K =2.0 m/s2.
English | 15
GSS 140 A
Professional
0 601 297 0..
W 180
-1
min 12000
-1
min 24000
mm 1.6
mm 115 x 107
mm 115 x 140
mm 113 x 105
kg 1.4
/II
Bosch Power Tools