Num'axes PIE 1010 Manual De Instrucciones página 30

# PIE 1010 – indice A
MMS settings
Enter press OK to enter
Auto input - allows you to use pre-programmed parameters. You
will have to select your country and mobile phone network operator.
Enter press OK
press OK choose your mobile phone network operator using the
and keys press MENU several times to move back
If "auto input" does not work (which may be due to recent changes
made by your mobile phone network operator) or if your mobile
phone network operator is not on the list for your country, please use
the "Manual input" option instead (see below). Do not hesitate to
check the settings with your mobile phone network operator.
Manual input – allows you to manually enter the MMS parameters
(APN, URL, IP, Port, Account, Password).
Note: if you choose to manually input the MMS parameters, you need
to contact your mobile phone network operator to have them provide
all the required information.
Mobile no. – allows you to input the mobile phone numbers the MMS
will be send to. Make sure to enter only numbers (do not include any
spaces or dashes). You can enter up to 4 mobile phone numbers.
Enter Phone number 1 to 4
your choice press MENU to move back
Note: only the first phone number can control the camera with the
SMS commands.
Email – allows you to input the email addresses that will receive data
from the camera (optional for SMS/MMS operation). You can
enter up to 4 email addresses.
Enter Email 1 to 4
press MENU to move back
MMS Manual Test – allows you to send an MMS manually for
testing.
Before starting the test, please make sure the SIM and SD cards are
inserted, the MMS parameters are set correctly and the MMS status is
not set to OFF.
You must allow your camera time to search for cellular service. After
the signal shows on the LCD, your can begin the test.
Enter Press OK to start the test. The camera will take a picture
automatically meanwhile the LCD will show a timer start to count the
transmitting time. Then a message on the LCD display will indicate if
the test is successful or not.
If the test failed check the camera settings and, if necessary, contact
your mobile phone network operator to verify the wireless related
data are correct.
choose your country using the
press OK to input phone number of
press OK to input email of your choice
and keys
30/88