Prior Manufacturer Configuration - Airzone AZAI6WSPME2 Guia De Inicio Rapido

PRIOR MANUFACTURER CONFIGURATION

The unit must be configured as follows in order to function correctly:
1. Check that the unit's HVAC control lock is disabled.
2.
The initial operation mode must be set to LWT (Heating or Cooling).
EN
3.
Enable SW2-1 (ON): Room thermostat 1 Input logic (IN1) logic change.
4. If you have a pulse counter to view the power consumption, enable SW3-4: Electric Energy
meter.
Important: Once the initial configuration has been carried out, the indoor unit must always
remain on for the correct operation of the installation.
12