Idiomas disponibles
Idiomas disponibles
Replacing the Remote Control Batteries
Cover
Phillips
Screws
NOTE: If the remote control no longer charges or needs to be recharged too often, the
batteries can be replaced.
NOTE: The remote control contains two AAA rechargeable batteries.
NOTE: Nonrechargeable batteries can be used temporarily if needed, but do not
connect the charger. Only connect the charger if using rechargeable batteries.
Remove the four Phillips screws on the bottom cover of the remote control.
Carefully remove the bottom cover. Do not pull or kink the ribbon cable attached
to the cover. If needed, insert a small flat-blade screwdriver into the access notches
to help lift the cover.
Remove the old batteries and then install the new batteries.
Replace the cover and secure with the four Phillips screws.
1463170-5-A
Batteries
Access
Notches
8
Ribbon
Cable
Kohler Co.
