Idiomas disponibles
Idiomas disponibles
Automatic off function: If not connected with another device
within 5 minutes, the device will turn off automatically, into
save power mode. Led light will turn off.
Low power status: Red light flashing.
1.Receive mode: Slide switch must under Off status, for all
audio devices with audio input port.
Pairing steps:
A. Slide the switch to RX, press button 2 sec to turn on the
device, Bluetooth status led light red/blue flashing alternately.
(attention: switching between must be done before
turning on device, changing mode must under device off,
do not change during power on)
B. After you turn on the device, Bluetooth status led light red/
blue flashing alternately = waiting for pairing.
C. Input 3.5mm cable into the AUX port, the other end into
AUX input port of audio device.
D. Open your device and search for "B-10S" in the list, and
connect.
E. When connected successfully, the Bluetooth status
light in blue and will flash once every second, then you can
start to enjoy your audio.
2. Transmit mode: (slide switch while device is off) Transmit
mode transmits sound to Bluetooth devices (headphone/
speaker) wirelessly.
Pairing steps:
A. Turn on Bluetooth speaker/headphone to ready for pairing.
B. Slide the switch on "TX" end, long press button 2s to turn
on device, Bluetooth status led light red/blue led light flashing
flashing alternately fast (attention: switching between must
be done before turning on device, changing mode must
under device off, do not change during power on)
C. Bluetooth status led light flashing fast, searching and waiting
for pairing.
