Idiomas disponibles
Idiomas disponibles
PARAMETERS FUNCTION
PARAMETERS
SEN5A-ACT
POWER
Adjust max Brightness level from 0% to 100% in sensor
mode and photocell mode
Sensor mode: Sensitivity set from 1% to 100%
SENS
Photocell Mode: Sensitivity set to disable
HOLD TIME
Following the detection of the last motion, the duration for
which the luminaire will remain at the selected
POWER brightness ranges from 10 seconds to 24 hours.
Photo_Con: Dusk to Dawn Function
LUX MODE
Adjust LUX IN from 10 to 100 lux, the luminaire turns on
when the ambient light level is below the set lux level.
Adjust LUX OUT from 100 to 500 lux, the luminaire turns off
when the daylight level is above the set lux level.
D_Harvest: Daylight Harvesting Function
Adjust LUX levels between 10 and 500 lux to maintain the
desired ambient brightness, while the Learn function remem-
bers and maintains the current brightness level.
DISABLE: disable daylight function; the luminaire operates
regardless of the ambient light level.
DIM LEVEL
Sensor mode: Adjust DIM LEVEL from 0% to 100%. If no
motion is detected within the HOLD TIME, the luminaire will
dim to a set dim level for the selected DIM TIME. After DIM
TIME has expired, the luminaire will remain at the set dim
level if the DIM TIME is set to infinity. However, the luminaire
will turn off if the DIM TIME is finite.
Once the motion is detected, the luminaire returns to the set
POWER brightness level.
Photocell mode: Adjust DIM LEVEL from 0%-100%. After
HOLD TIME has expired, the luminaire dims and remains at a
set dim level until the next dimming or power cycle.
DIM TIME
Adjust DIM TIME from 1m to infinity(+oo). The DIM TIME
setting determines the duration the sensor will keep the
luminaire at the DIM LEVEL after the HOLD TIME has expired.
Note: In Photocell mode, the DIM TIME is configured to an
infinite value.
EXIT
Return to the Type Selection menu for remote programs.
3
©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105
Head Office, Canada: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673
SEN5A-CT
Adjust max Brightness level to 100%, 75%, 50%, or 25% in sensor
mode
Sensor mode: Sensitivity set to 100%, 75%, 50%, or 25%
Following the detection of the last motion, the duration for which
the luminaire will remain at the selected POWER brightness rang-
es from 10 seconds to 60 minutes.
Photo_Con: Dusk to Dawn Function
Adjust LUX IN from 10 to 100 lux, the luminaire turns on when
the ambient light level is below the set lux level.
Adjust LUX OUT from 100 to 500 lux, the luminaire turns off
when the daylight level is above the set lux level.
Daylight: Daylight Function
Adjust LUX from Learn, 10 lux, 30 lux, or 50 lux. The luminaire
turns on when the ambient light falls below the set lux level,
while the Learn function remembers and maintains the current
brightness level. When the daylight function is enabled, the DIM
TIME must be finite.
If the LUX is set to DISABLE, the luminaire operates regardless of
the ambient light level.
Sensor mode: Adjust DIM LEVEL from 0% to 100%. If no motion
is detected within the HOLD TIME, the luminaire will dim to a set
dim level for the selected DIM TIME. After DIM TIME has expired,
the luminaire will remain at the set dim level if the DIM TIME is
set to infinity. However, the luminaire will turn off if the DIM TIME
is finite.
Once the motion is detected, the luminaire returns to the set
POWER brightness level.
Adjust DIM TIME from 1m to infinity(+oo). The DIM TIME setting
determines the duration the sensor will keep the luminaire at
the DIM LEVEL after the HOLD TIME has expired.
Note: When the daylight function is enabled, the DIM TIME must
be finite.
Return to the Type Selection menu for remote programs.
Street, 3
Floor, Olathe, KS 66061 1.800.852.2217
th
rd
eiko.com
Rev. 06/01/23
