Idiomas disponibles
Idiomas disponibles
INDICATOR AND BUTTONS FUNCTIONS
WARNING: After pressing the On/Off button, the sensor enters a permanent On/Off mode. To exit this
mode and return to the previously saved setting, the Auto button must be pressed to enable the sensor.
LED indicator will flash when pressing SEND.
Permanent On/off.
Display previous
Sensor is disabled
settings
Move cursor left
Exit Permanent On/
Off mode. Sensor is
enabled to previous
saved settings
Test mode. Hold
Revert to dip switch
time is 2s
settings or default
settings
DEFAULT MODE SETTINGS USING BUTTONS -
Application
Scene Options
Indoor
Mode1
Indoor
Mode2
Indoor
Mode3
Outdoor
Mode4
All the parameters in the preset MODE1, MODE2, MODE3, and MODE4 can be adjusted and saved as individual modes for
future use.
1. Press the DISP button to display the last setting.
2. To access MODE1, MODE2, MODE3, or MODE4, press the corresponding button and avoid pressing any other buttons to prevent
entering the temporary adjusting mode. If accidentally entered, use the EXIT or
if necessary.
3. Once you have entered MODE1, MODE2, MODE3, or MODE4, you may adjust any parameter as desired. To save the adjusted
parameters, simply press the OK button.
2
Move cursor up
Saves all settings
selected. Press
before pressing
send
Move cursor down
Power
Sens
100%
75%
100%
75%
100%
75%
100%
75%
©2023 EiKO Global, LLC. World Headquarters: 18000 W. 105
Head Office, Canada: 7900 Goreway Dr Unit 8, Brampton, ON L6T 5W6 1.888.741.2673
Send saved settings
to the sensor
Move cursor right
Return to previous
menu
Hold Time
Dim Time
5min
30min
1min
Infinity
5min
Infinity
1min
Infinity
button to exit the temporary adjusting mode
Street, 3
Floor, Olathe, KS 66061 1.800.852.2217
th
rd
Dim Level
Lux Mode
30%
Disable
30%
Disable
30%
D_Harvest (300lux)
30%
Photo_Con(30lux/500lux)
eiko.com
Rev. 06/01/23
