Idiomas disponibles
Idiomas disponibles
d ) Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the power
tool or these instructions to operate the power tool.
Power tools are dangerous in the hands of untrained users.
e ) Maintain power tools and accessories. Check for
misalignment or binding of moving parts, breakage
of parts and any other condition that may affect the
power tool's operation. If damaged, have the power
tool repaired before use. Many accidents are caused by
poorly maintained power tools.
f ) Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges are less
likely to bind and are easier to control.
g ) Use the power tool, accessories and tool bits, etc.
in accordance with these instructions, taking into
account the working conditions and the work to be
performed. Use of the power tool for operations different
from those intended could result in a hazardous situation.
h ) Keep handles and grasping surfaces dry, clean and
free from oil and grease. Slippery handles and grasping
surfaces do not allow for safe handling and control of the
tool in unexpected situations.
Battery Tool Use and Care
a ) Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with
another battery pack.
b ) Use power tools only with specifically designated
battery packs. Use of any other battery packs may create
a risk of injury and fire.
c ) When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can
make a connection from one terminal to another.
Shorting the battery terminals together may cause burns
or a fire.
d ) Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
e ) Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or risk
of injury.
f ) Do not expose a battery pack or tool to fire or
excessive temperature. Exposure to fire or temperature
above 130 °C may cause explosion.
g ) Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions. Charging
improperly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
Service
a ) Have your power tool serviced by a qualified repair
person using only identical replacement parts. This
will ensure that the safety of the power tool is maintained.
b ) Never service damaged battery packs. Service
of battery packs should only be performed by the
manufacturer or authorised service providers.
Additional Safety Rules for PVC/PEX Cutter
Attachment
WARNING: Read and understand these instructions
for the attached power tool. Before use, ensure the
attachment is properly attached to the tool.
WARNING: Use the PVC cutter attachment only with
DEWALT or DEWALT-approved accessories. Other uses of
modifying the attachment for other applications may
damage the attachment, damage the accessories and/
or can result in a faulty installation. Faulty installations
can result in failures, injury to installers and damage to
property.
WARNING: When using this DEWALT cutting attachment
for cutting PVC/PEX for fittings, the preparation of the
cut should follow recommendations from the fitting
manufacturer for proper installation procedures. Proper
preparation and installation is the responsibility of the
installing contractor.
a. Keep all body parts away from the attachments during
operation and any time the power is ON. A moment of
inattention while operating power tools may result in
serious personal injury. Fingers or hands can be crushed,
fractured or amputated if they become caught in the
attachments.
b. Inspect tool and attachments before use for any loose or
missing parts. Never attempt to repair or use a damaged
PVC/PEX cutter, brace or other attachment. Replace with
a new cutter or brace.
c. This tool produces large forces that can break
attachments or parts and cause injury. Always be
attentive and take proper safety precautions, including
wearing eye protection.
d. Before operating, inspect job site for hazards including
chemicals or waste that could remain in pipes.
e. Before operating, read and understand all safety
and operating instructions including the fitting
manufacturer's installation instructions and the
instructions for any other equipment used with this tool.
Failure to follow all instructions and warnings may result
in property damage and/or serious personal injury.
f. Keep the cutting area of the attachment free from hands
and other objects while the tool is in use. Fingers could
be crushed or cut.
g. For best results, always clamp or anchor the material to
be cut.
h. Cutting operations may cause material pieces to fly.
Flying particles can cause permanent eye damage.
ALWAYS wear eye protection.
i. Always wear gloves when operating tool and handling
materials. The ends of the materials can be sharp and
cause serious personal injury.
EnGLIsh
19
