Idiomas disponibles
Idiomas disponibles
Function
Button
Power on
Turn on
Turn off
Luck
function
Light
function
Fan
function
Steam
function
Operation
Please open the water supply valve before you power the steam
generator.
When the system is power on, touch the button to start the
machine. The current temperature will be displayed on the
screen and the lamp will light up.
Finish washing, touch
generator. At that time, the LCD screen display count down for 60
seconds, the steam generator automatic drain to avoid water
timescale, turn on the fan, automatic turn off the Steam, Lamp,
Radio. The Stream generator will change to standby mode again
after 60 seconds. The fan turns off.
In the power-on state, when there is no button action for 10
seconds, the system enters the lock button state and displays the
lock button icon
. In the lock state, touch power key
3 seconds till the unlock icon
available again. .
In the power-on state, short press the button to switch the light
function. First, top light is on; second, back light is on; third, top
light is off; forth, back light is off. Pay attention: there is not back
light for this model.
In the power-on state, short press the button to switch the fan
function.
A), In the power-on state, short press
function. The steam icon flash and the steam spray out after 3
minute. On operating, you can touch
steam generator.
B), Temperature setting
The default temperature of the steam is 40 °.
After the steam function is turned on, Touch "SET" on the control
panel until
will flash.
power key to turn off the steam
appears, then all keys will be
appear on display. The temperature icon
for
to turn on the steam
again to stop the
