Create BBQ SURFACE 2 IN 1 Manual Del Usuario página 8

3. Once the wheels are placed on the central
axis, insert the wheel locking pins at each
end so that they are correctly fastened.
A
5. Stand the cart upright.
(A)Remove the screw indicated in the
graphic. Put your foot in the center of
the support tube (B) and lift up the side
table (D) with one hand and the wheel
tube with the other hand. Now assemble
the tube (C) with the tube located under
the side table (E) and the cart frame will
be unfolded. Be careful not to pinch your
fingers.
F
7. Place the piece (F) fitting it into the piece
(G) as shown in the drawing. Once the
pieces are fitted, screw them with the
short screws, the washers and the nuts.
8
E NGL I SH
D
C
B
E
4. Then attach the decorative outer wheel
covers to each end.
6. Install the blocking device.
Press the spring behind the tube and
hook the curved hook into the protruding
piece. Then release pressure so that the
safety hook is locked. Make sure that the
safety device is always closed when you
are going to use the grill. Do not try to pull
the hook while using the appliance.
8. Once the two pieces are joined, place
them on the bars of the barbecue cart,
aligning them with the holes and then
screw them with the long screws, wash-
ers and nuts.