Create BBQ SURFACE 2 IN 1 Manual Del Usuario página 7

touch the appliance by the handles provided for this.
• Only place the appliance on surfaces insensitive to heat. Make sure the
appliance is not too close to the edge.
• To prevent heat buildup, do not place the appliance directly under cabi-
nets or shelves.
• Do not place the appliance on or near a stove or heat source.
• Do not expose the device to excessive temperatures and climatic variations.
• Never fill the grill with liquids.
• If there are damaged parts, do not continue to use the grill.
1. Lid handle
2. Thermometer
3. Grease tray
4. Thermostat
5. Removable side tray
6. Power supply
7. Wheels
8. Barbecue lid
9. Grill
10. Side tray
11. Latch hook
12. Locking hook
13. Supporting feet
Screws
Long screws
The paws
1. Place the leg frame in the curved area
of the leg and screw it down with the leg
screws. Repeat the same step with the
other frame.
PARTS LIST
1
2
3
4
5
6
7
ASSEMBLY INSTRUCTIONS
Washers and Short bolts,
nuts washers and nuts
2. Insert the center axle bar of the wheels
Locking pins
into the holes. Then place the wheels on
the ends of the bar.
8
9
10
11
12
13
Thumbscrew
7
E NGLI SH