Idiomas disponibles
Idiomas disponibles
OPERATION
Starting the Engine
1. Sit on the seat.
2.
3.
upwards.
4. Push the blade switch down to disengage the
mower blades.
5. Move the steering controls outward to the
6. Move throttle control to the middle position. If
7.
8.
position.
18
IMPORTANT INFORMATION Do not run the
9.
was used to start a cold engine.
10. Set the engine speed with the throttle. Let
the engine to run at a moderate speed,
Running
1.
downward.
NOTE: The mower is equipped with an
operator presence system. If the engine is
running and the operator tries to leave the
2. Move the steering controls inwards, out of the
neutral position (N).
3.
to the set cutting height.
4. Move throttle control to full throttle.
5.
switch up.
WARNING
near mower when engaging blade switch.
6.
move forward in a straight line.
Stopping the Engine
1. Move the throttle to the minimum position
2. Move the steering controls outward.
3.
blade switch down.
4.
pedals forward to the transport position.
5. When the machine is standing still, activate
idle at least 60 seconds and get to a normal
the engine for longer periods.
