Idiomas disponibles
Idiomas disponibles
Using a flat blade screwdriver remove
the plastic hinge cover from the top of
the door.Be careful not to scratch the
refrigerator surface.
Using a thin-bladed tool,carefully pry up
and remove the hole plugs on top of the
door and the top of the opposite side of
the cabinet.Insert plugs into the provided
holes on opposite side of door and into
the holes exposed by the removal
of the top hinge bracket.
Insert top bracket hinge pin into the hole on
top of the hole on top of the door.Use the
two previously removed screws to attach
back of top bracket to cabinet.Be sure to
align the paper gasket beneath the two
attachment holes in the bracket.
Check that the door is aligned horizontally and vertically
and that the seals are closed on all side before finally
tightening the top hinge.Readjust the leveling foot.Turn
clockwise to lower and counterclockwise to raise the level.
Using a slotted screwdriver,unscrew the two
screws from the top hingebracket.Remove the
bracket and underlying paper gasket.Life and
remove the door from the bottom hinge pin.Set
door safely aside.
Using a slotted screwdriver,remove the two
screws attaching the bottom hinge bracket to the
refrigerator cabinet.Unscrew the foot from the other
side of the cabinet.Avoid tilting the refrigerato more
than 45 degrees when removing the bottom bracket
and foot.Attach bracket and foot to the opposite side
from where they were removed.
Replace the plastic hinge cover over the top
hinge bracket.
