INTERVAL
ACTION
DESCRIPTION
Remove and clean the pusher disc and blade group after each use.
Parts may be cleaned with water and mild detergent and must
Daily
Cleaning & disinfecting
be rinsed thoroughly. Do not put the parts or accessories in the
dishwasher.
It 's recommended to wipe the exterior of the appliance at least once
Weekly
Surface cleaning
a week.
7. TROUBLESHOOTING
PROBLEM
POSSIBLE CAUSE
Main fuse may be blown.
Aluminium pusher disc drum may be
stuck.
Blades do not rotate, even though
The feeding hopper may not be fully
the Start button has been pressed.
closed.
Blade block group may not be in place.
Blades may be blunt.
There may not be enough potatoes
in the aluminium pusher to push the
Blades do not cut.
potatoes to the blades.
The blades may be stuck and not able
to rotate.
There may not be enough potatoes
Last potato remains between the
in the aluminium pusher to push
blades.
potatoes to the blades.
8. STORAGE
Roll the power cable up and store it safely. Make sure the appliance is thoroughly cleaned before storing
it away. Store in a cool, dry place.
POSSIBLE SOLUTION
Check the main fuse. Ensure the
electricity is on.
Turn off the machine by pressing
the Stop button. Open the feeding
hopper and solve the stuck problem
and try again.
When the feeding hopper is closed,
the magnetic sensor recognizes
the hopper and activates it. Ensure
the feeding hopper is closed before
operation.
When the blade group is closed,
the magnetic sensor recognizes the
blade and becomes activated. Ensure
the blade is correctly installed
before operations.
Replace blunt blades with new ones.
This is normal. Throw more potatoes
into the feeding hopper and continue
operation.
Remove stuck potatoes with care.
This is normal. Add more potatoes
to the feeding hopper and continue
operation.
9. DISCARDING
When disposing of this appliance, please do so in compliance with local and national regulations. It's also
important to dispose of any related materials correctly. This piece of equipment may contain packaging
and accessories that have to be collected and disposed of separately. These should not be treated as
unsorted municipal waste.
Recycling contributes to the conservation of natural resources. By disposing of waste in the proper
manner, you help avoid hazards in the environment that could be caused by improper treatment of waste.
Packaging: The packaging is made from materials to be disposed of through local recycling facilities.
Batteries: If the machine contains a battery, these may contain toxic substances and are a hazard to the
environment. Please dispose of used or rechargeable batteries responsibly through a local collection point.
Electronics: This appliance contains electronic parts. Dispose of electrical waste at a recycling collection
point for electronic equipment.
EN
11