Rowenta SF8230 Manual Del Usuario página 5

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 11
• Les plaques ne sont pas statiques.
- C'est tout à fait normal, le lisseur est équipé de plaques mobiles pour
obtenir de meilleurs résultats avec votre lisseur.
• L'appareil arrête de chauffer après un certain temps:
- Ceci est normal, car cet appareil a un système d'arrêt automatique.
PARTICIPONS À LA PROTECTION DE L'ENVIRONNEMENT !
Votre appareil contient de nombreux matériaux valorisables ou
recyclables.
Confiez celui-ci dans un point de collecte ou à défaut dans un
centre service agréé pour que son traitement soit effectué.
FR
À DÉPOSER
Cet appareil,
EN MAGASIN
ses accessoires,
piles et cordons
se recyclent
Points de collecte sur www.quefairedemesdechets.fr
Privilégiez la répara�on ou le don de votre appareil !
Ces instructions sont également disponibles sur notre site Internet
www.rowenta.com.
6
À DÉPOSER
EN DÉCHÈTERIE
OU
Read the instructions carefully
EN
as well as the safety guidelines before use.
1. GENERAL DESCRIPTION
A. SAFETY CAP
B. CERAMIC HEAT PLATES
C. LED DISPLAY
D. ON/OFF SWITCH/ TEMPERATURE CONTROL
E. POWER SUPPLY CORD / ROTATING POWER CORD OUTLET
2. SAFETY INSTRUCTIONS
• For your safety, this appliance complies with the applicable standards
and regulations (Low Voltage Directive, Electromagnetic Compatibility,
Environmental...).
• The appliance's accessories become very hot during use. Avoid contact with
the skin. Make sure that the supply cord never comes into contact with the
hot parts of the appliance.
• Check that the voltage of your electricity supply matches the voltage of
your appliance.
• Any error when connecting the appliance can cause irreparable harm, not
covered by the guarantee.
Model SF8210 manufacturer by Groupe SEB - 38780 Pont Eveque - France.
This appliance is designed to be also used in commercial areas.
• For additional protection, the installation of a residual current device (RCD)
having a rated residual operating current not exceeding 30 mA is advisable
in the electrical circuit supplying the bathroom. Ask for installer for advice.
• The installation of the appliance and its use must however comply with the
standards in force in your country.
• WARNING: The crossed bath tub symbol (ISO 7010-P026 (2011-05)
on the appliance means not to use this appliance near bathtubs,
showers, basins or other vessels containing water.
• This appliance is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for
their safety. Children should be supervised to ensure that they do not play
with the appliance.
• When the appliance is used in a bathroom, unplug it after use since the
proximity of water presents a hazard even when the appliance is switched off.
• This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities or lack
of experience and knowledge if they have been given supervision or
instruction concerning use of the appliance in a safe way and understand
the hazards involved. Children shall not play with the appliance. Cleaning
and user maintenance shall not be made by children without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similarly qualified persons in order to avoid a hazard.
• Stop using your appliance and contact an Authorised Service Centre if: Your
appliance has fallen, if the LED display blinks for over 2 minutes, if it is not
operating normally.
7
loading