Installing The Kettle Holder; Using The Kettle; Before Initial Use - Dometic MCK750 Instrucciones De Uso

Installing the kettle holder

6 Installing the kettle holder
Observe the following installation instructions:
• Make sure the installation location provides sufficient stability.
• Check beforehand that there is sufficient space on the other side for the drill head to come out.
• Make sure no concealed cables are damaged when drilling or screwing.
• Make sure the airbag function is not impaired.
To perform the installation, proceed as follows:
➤ Fasten the kettle holder with the screws supplied.
7

Using the kettle

A
NOTICE!
• Use the device only when the vehicle is stationary, not while it is moving.
• Please immediately absorb any escaping fluid. Damage to the electronics may be
caused by moisture entering the device.
• Danger of scalding!
Empty the water tank carefully.
• Fill the water tank up to between the minimum and maximum mark (fig. 2,
page 3).
7.1

Before initial use

A
NOTICE! Risk of damage!
Before connecting the device to the DC power socket, you have to fill the water tank
with water.
➤ Boil water once or twice to clean the water tank.
➤ Pour the boiled water away.
8
MCK750
EN