Master COFFEE 12 Manual De Instrucciones Para El Uso Y Mantenimiento página 9

9.
10.
mise the safety.
11. Keep connections dry.
12. If the power supply cord is damaged, avoid to use the appliance.
For power cord replacing, please contact the manufacturer or the
13. If the appliance is not used for a long period, disconnect it from
the power supply.
14.
eration.
2. ELECTRICAL INSTALLATION
The installation should always be carried out by a qualified
electrician or a competent person in accordance with the
standards HD 384 CENELEC for Europe, or international IEC
60346-7-708 1988. The energy supply must be done through a prop-
erly grounded socket and the impedance of the electrical network
must be less than 0.3 ohm.
In case of directly connection to supply line an overvoltage category
III bipolar circuit breaker with contact opening distance of at least 3
mm must be fitted upstream from the supply line.
Be careful to connect the heater to a supply line protected by 16 A
fuses not quick-acting type.
•
adequate clearance.
•
the top of the heater and a ceiling or roof. The appliance should be
•
front of the COFFEE heaters or too near.
•
9
-
-