Idiomas disponibles
Idiomas disponibles
Battery Charging and Alerts
Open the Charging port cover and connect the charger to the Charging port.
Slide and hold the Volume jog switch in the volume down (
Indicator lamp and battery level by voice.
Vibration Alert Settings
Out of Range
If the device connected to the product is out of effective communication range (33 feet/10 meters),
the communication signal becomes weak and the communication is lost.
If the device comes back within effective communication range, the product automatically reconnects
to the device. If the device is not automatically reconnected, press the MFB on the product to connect
to it manually.
14
Indicator Lamp
Battery Status
Charging
If the charging cable is removed while the Power switch is ON, the
power turns on and the product automatically connects to the
device whose connection settings have been completed.
Battery Status
Sufficient
Indicator Lamp
Blue flashes
The vibration alert is automatically set to the ON position when you
turn on the power.
To activate or deactivate the vibration setting, slide and hold the
Volume jog switch in the volume up (
NOTE: If you turn off the vibration alerts, it will not vibrate even when
a call is being received or you are out of communication range.
Red
Purple
80%
) direction for one second to check the
Normal
Purple flashes
) direction for two seconds.
Blue
Completed
Insufficient
Red flashes
