The base unit will be in registration mode for 3 minutes.
If your base unit does not has the PAGE button option:
Reset the base power and the base will be in registration mode for 3 minute.
You must do the following to subscribe the handset:
(1) Press <MENU> button
(2) Use the
<▲> or <▼>
(3) Use the
<▲> or <▼>
handset to (1 - 4) and press <OK>
(4) Enter the base PIN code (0000) and press <OK>.
(5) The unit will start searching for the base
(6) When the handset is registered, it will show [HS] followed by the handset number
8 Telephony Operations
8.1
Make a Phone Call
(1) Press <TALK ON> button. You will hear the dial tone.
(2) Enter the desired telephone number.
(3) Press the <TALK OFF> button when you want to terminate the call.
8.2
Call Setup with Dial Preparation
(1) Enter the desired telephone number. An incorrect number can be corrected by means
<MUTE> key.
(2)
Press the <TALK ON> button. The number will be dialed automatically.
(3) Press the <TALK OFF> button when you want to terminate the call.
NOTE: When you haven't pressed a button for 10
disappear and the handset returns to standby mode.
8.3
Redial the Last Number Dialled – in Talk Mode
Your cordless handset stores the last external numbers dialled, into memory buffer.
(1) Press <TALK ON> button. You will hear the dial tone.
(2) Press the <LNR> key. The number you last called is dialled automatically
8.4
Redial One of the Last Numbers Dialled – in Standby Mode
(1) Press the <LNR> button. The number you last called appears on the display.
(2) If you would like to dial one of the last numbers dialled, press the <▲> or <▼> button to select the
desired number appears on the display.
(3) Press the <TALK ON> button, the number shown on the display is dialled automatically.
(4) After finishing your call, press the <TALK OFF> button to hang up.
button to scroll to [REGISTRATION] and press <OK>.
button to select the number of the base unit you would like to subscribe the
seconds, the number you've already entered will
of the
P-13