Manual Selection - Premier TEL-4736IL Manual De Instrucciones

6.9 Adjust LCD Contrast
You can adjust the LCD contrast to suitable for your viewing angle
(1) Press <MENU>
(2) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>
(3) Use the <▲> or <▼> button to scroll to [CONTRAST] and press <OK>
(4) Use the <▲> or <▼> button to adjust 8 levels of LCD contrast
(5) Press <OK> to confirm setting

6.10 Manual Selection

If you set the handset to manual selection, the handset will only choose the base unit you have set.
Press <MENU> button.
(1) Use the <▲> or <▼> button to scroll to [HS SETTINGS] and press <OK>
(2) Use the <▲> or <▼> button to scroll to [SELECT BASE] and press <OK>
(3) Use the <▲> or <▼> button to select to [AUTO] or [BASE #].
(4) Select one of the base number to link with and press <OK>
(5) If you set a base number not yet registered before, it gives an error tone and asking for select
another base number.
Notice :
a) If there is a " + " appeared at the right most digit of this base number, it means the handset has
already been registered.
b) When you have activated automatic base selection and the handset is out of range on the current
base, the handset will only search for the strongest base in standby (not during communication).
c) Caution: Before you can select a base unit, the handset must be subscribed to the base first.
6.11 RESET OF THE HANDSET
This will undo all changes and set back all default settings (ringer volume, ringer tone etc.)
(1) Press the <MENU> button.
(2) Use the <▲> or <▼>
(3) Use the <▲> or <▼>
(4) Enter the PIN code and press <OK>
7 REGISTER HANDSET
You can subscribe 5
the base unit upon delivery (base unit 1).
You only need to subscribe the handset if:
 The handset subscription has been removed from the base unit (e.g., for re-initialization).
 You want to subscribe a different handset to this base unit.
If your base unit has the PAGE button option:
 Press and hold the <PAGE> button on base for 10 seconds.
P-12
button
button to scroll to [HS SETTINGS] and press <OK>.
button to scroll to [HS DEFAULT] and press <OK>.
handsets to 1 base unit. By default, each handset is subscribed as handset 1 on