Idiomas disponibles
Idiomas disponibles
TOOL DESCRIPTION
The cordless wood planer is a power tool designed for planing, chamfering edges and planing rebates in wood and wood-based
materials. The tool has an adjustable planing depth, a guide bar and a spigot for chip and dust extraction. Under no circumstances
should the tool be used for working on materials other than wood. The battery power supply allows you to work in places where
there is no easy access to a mains power supply. The correct, reliable, and safe operation of the appliance depends on its proper
use, therefore:
Read this entire instructions manual before the fi rst use of the tool and keep it for future reference.
The supplier is not liable for any damage resulting from failure to observe the safety instructions and recommendations contained
in this manual.
EQUIPMENT
The following should be included in the factory package: a planer and guides for planing the frames. The supply battery and
battery charger are not included.
TECHNICAL DATA
Parameter
Part no.
Operating voltage
Revolutions (idle speed)
Planing depth
Max. planing width
Noise level
- sound pressure L
± K
pA
- power L
± K
wA
Protection rating
Insulation class
Vibration level a
± K
h
Weight
Battery type
The declared noise emission value has been measured using the standard test method and can be used to compare one tool to
another. The declared noise emission value can be used in the preliminary exposure assessment.
The declared total vibration value has been measured using the standard test method and can be used to compare one tool to
another. The declared total vibration value can be used in the initial exposure assessment.
Caution! The vibration emission during tool operation may diff er from the declared value, depending on the manner the tool is
used.
Caution! Safety measures to protect the operator, which are based on an assessment of exposure under actual conditions of
use (including all parts of the work cycle, such as the time when the tool is switched off or idle and the activation time), must be
specifi ed.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
Do not work with power tools in an environment with an increased risk of explosion, containing fl ammable liquids, gases
or vapors. Power tools generate sparks that can ignite dust or fumes.
Children and third persons should not be allowed to enter the workplace. Loss of concentration can result in loss of control.
O R I G I N A L
14
EN
Unit
[V]
[min
]
-1
[mm]
[mm]
[dB]
[dB]
[m/s
2
]
[kg]
I N S T R U C T I O N S
Value
YT-82192
18 DC
15,000
0-2
82
84.0 ± 3.0
95.0 ± 3.0
IPX0
III
5.22 ± 1.5
2.5
Li-Ion
