Cleaning
Cleaning the Image Scanner
If the glass of the scanner gets soiled from ink or paper dust, the quality of
the image data may deteriorate. Clean the glass every 6 months or every
100,000 passes.
Follow these steps to clean the glass.
1.
Open the scanner cover. (See "Opening the Covers" on page 10.)
2.
Lightly wipe the glass areas shown in the picture below with a soft,
dry cloth.
Do not use synthetic detergent, benzine, water, or other liquid for
cleaning. Doing so may result in a stain.
Never apply any liquid directly to the glass of the scanner.
When the glass of the scanner is smeared with oil, grease, or other
unremovable substance, wipe it with a cloth lightly dipped in
alcohol. After that, wipe off all remaining alcohol.
Be careful not to spill liquid into the scanner mechanism or electronic
components. This could permanently damage the mechanism and
circuitry.
3.
Close the scanner cover firmly until it clicks in place.
CAUTION:
CAUTION:
TM-S1000 User's Manual 15