Idiomas disponibles
Idiomas disponibles
EN-
S.A.S. au capital de 5 000 000 € - Z.I. Les Giranaux - BP71 - 70103 ARC-LÈS-GRAY CEDEX - FRANCE - RCS VESOUL B 425 650 090 - SIRET 425 650 090 00011 - n° T.V.A CEE FR 87 425 650 090
These instructions apply to all T5ZSPHz drive, the different versions of which are available in the current
catalogue.
Field: The T5ZSPHz drive are designed to drive all types of vertical outdoor screens. The installer, who
must be a motorisation and home automation professional, must ensure that the drive product is installed
in accordance with the standards in force in the country in which it is installed such as EN 13561 relating to
outdoor screens and awnings.
Liability: Before installing and using the drive, please read operating and installation guide carefully.
Please read these instructions carefully before installing and using the drive. In addition to following the
instructions given in this guide, the instructions detailed in the attached Safety instructions document must
also be observed. The drive must be installed by a motorisation and home automation professional, according
to instructions from Simu and the regulations applicable in the country in which it is commissioned. It is
prohibited to use the drive outside the field of application described above. Such use, and any failure to
comply with the instructions given in this guide and in the attached Safety instructions document, absolves
Simu of any liability and invalidates the warranty. The installer must inform its customers of the operating and
maintenance conditions for the drive and must provide them with the instructions for use and maintenance, and
the attached Safety instructions document, after installing the drive. Any After-Sales Service operation on the
drive must be performed by a motorisation and home automation professional. If in doubt when installing the
drive, or to obtain additional information, contact a Simu adviser or go to the website www.simu.com.
INSTALLATION
1
Instructions which must be followed by the drive and home automation professional installing the
drive:
- Methods of wiring are given by national standards or IEC60364 standard.
- Cables routed through metal must be protected and insulated by using grommets or bushings.
- The cable for the T5ZSPHz motor is replaceable. If it is damaged, replace with the same type of cable. The
cable may only be installed on the motor by a qualified personnel. Care must be taken when replacing the
cable not to damage the contacts. Continuity of the earth (ground) connection must be confirmed.
Recommendations: Keep a minimum distance of 20 cm between two T5ZSPHz motors. Keep a minimum
distance of 30 cm between T5ZSPHz motors and Hz transmitters. A radio appliance using the same frequency
(433.42 MHz) may deteriorate our product's performance (ex. : hi-fi radio headphones).
Drilling of the tube:
Assembly:
1
0.55
Nm
±0.1
T5ZSPHz
(230V ~ 50Hz)
IP44
ALUMINIUM WHEEL
9910004
STEEL
5
9910004
2
3
06/32 • 06/17 • 10/32
• 10/17 • 15/17
15/32
25/17 • 35/17
Ø4,8x10
Ø5 x 10
4
25Nm max.
5137328A
EN- ORIGINAL INSTRUCTIONS
i
A
ØB
C
Ø min.
583
47
653
5
26 4.2
657
-20°C / +60°C
mm
D
L1
L2
596
619
666
689
670
693
EN
1/12
