Idiomas disponibles
Idiomas disponibles
Plantillas de Vitrocerámica
E-IX. Installation
The installation must be carried out by a suitably qualified person,
in accordance with the current version of the following.
connecting the appliance, ensure that the supply voltage marked on
the Rating Plate corresponds with your main supply voltage.
WARNING: THIS APPLIANCE MUST BE EARTHED.
⚫ If you have to change the power cord, the earthing (yellow/green)
conductor must always be 10 mm longer than the line conductors.
⚫ Ensure that the temperature of the main supply cables does not exceed
50°C.
⚫ If the main supply cables are damaged, they must be replaced by an
appropriate replacement.
ASSEMBLY OF CERAMIC HOB OLPE-N
Make an opening with the dimensions given in the diagram for the hob to be
mounted on the worktop．
⚫ The kitchen units that are in direct contact with the appliances must be
heat-proof (min. 95°).
⚫ The appliance can be installed on a work surface with a thickness of
between 30 and 40 mm and near to walls that are higher than the work
surface, maintaining a minimum distance of 100 mm.
www.derkochline.com
Ceramic Hob
Before
41
