Idiomas disponibles
Idiomas disponibles
Plantillas de Vitrocerámica
timing of cook zone. The decimal point of corresponding cooking zone is
always on. The digital tube decimal point " " is extinguished until the
countdown time is over.
7.Power off
8.Child Safety lock button
• Under the child safety lock mode, the "
flash(1s/time). If the cooking zone has set the time, the digital tube will
display the time and "
"
"
• Under the child safety lock mode, you can unlock it by pressing and
holding the child lock button "
• In the child safety lock mode, all control panel bottoms will be disabled
except the power off and child lock safety buttons.
9.Partition timing
The timer can be timed separately for any cooking zone, and the timing of
each cooking zone is independent of each other.
Single cooking zone timing
When setting a countdown time for a cooking zone, press timer button"
first, the digital tube decimal point " "of the selected cooking zone will be on.
The decimal point of timer digital tube " "will display, and to indicate the set
timer has been related with the selected cooking zone. At this time, you can
use the plus button and minus button to set the countdown time.
Under standby mode or heating mode, long press " "
button for 3s, a short audible signal will be heard, the
appliance will go into power off mode. If the
corresponding cooking zone surface has residual heat at
this time, the digital tube of power level indicator will
flash display " ",and indicate residual heat warning.
The control panel can be locked by pressing and holding
the child safety lock button "
appliance is under standby status or heating status. The
safety lock icon will display. When the appliance switches
off the safety lock icon will extinguish.
" alternately. If not, it will display "
www.derkochline.com
" for 3 seconds whilst the
" for about 3 seconds.
Ceramic Hob
" will display and
" and
35
"
