Idiomas disponibles
Idiomas disponibles
Plantillas de Vitrocerámica
Several cooking zones timing
Each timer setting operation will be the same as "Single cooking zone timing".
Press any cooking zone selection button, and the timer digital tube display the
timing value of that cooking zone.
When multiple burners are timed, you can switch the timing of different
burners by pressing the time button "
When not selecting any cooking zone, the digital tube will show the minimum
timer value of cooking zones, and the digital tube of corresponding cooking
zone will show " ".
10.Default timing
All the cooking zones have default timing function. The relationship of default
timing and power level refers to table below:
Power Level
Default timing(h)
When all the default timing is reached, the cooking zones will switch off
automatically and enter into standby mode.
11.High temperature warning
Press and hold power button "
the whole appliance will stop heating, but the cooking surface
still has high temperature, the indicator digital tube of
corresponding cooking zone which stop heating will show
residual heat warning symbol " ", to indicate corresponding
cooking surface high temperature.
As long as the cooking zone has heated before, the high temperature warning
symbol " " will display for 35 minutes continually after the hob turn off.
• High temperature protection: The electronic temperature sensor on
the control panel will transmit the real-time temperature to the chip of
the control panel. The control sensor starts protection when the
electronic temperature sensor gauges the current temperature is higher
than a certain value, to reduce the heating level of the cooking zone
currently, and resumes the heating level after the temperature drops.
• Residual heat protection: When the whole appliance stops heating,
the digital tube of the relative heating zone will display high temperature
".
1
2
6h
6h
www.derkochline.com
3
4
5
5h
5h
4h
" manually for 3s till switch off,
Ceramic Hob
6-9
1.5h
36
