Fitting the drain hose and holder
To drain the condensation from the lower water tank, a hose and holder are supplied
with the air conditioner.
1
2
3
4
4
90
Fig. 18
Remove the rubber plug (see fig. 19).
Fig. 19
Connect the supplied hose J (see fig. 1) to where the rubber plug was (see fig.
20) and fasten the hose with hose clip I.
Fit the hose holder G (see fig. 1) to the rear of the air conditioner (see fig. 21).
If the hose is not being used to drain the condensation, place the hose in the
hose holder to prevent leaks (see fig. 22).
Fig. 20
Fig. 21