Idiomas disponibles
Idiomas disponibles
English
• iLoud Precision MTM
2x5" ultralight coated paper low distortion mid-woofer
1.5" high output, low distortion chambered textile dome tweeter
Audiophile, custom-designed, proprietary Class-D power amplifiers
175 W total RMS power
AD and DA: 96 kHz / 24 bit
Complete DSP controlled system, 96kHz sampling rate
45 Hz to 30 kHz frequency response +/- 1 dB
37 Hz low frequency extension @-4 dB
Coherent phase response +/-20° from 150 Hz up
Coherent time response across the audio spectrum
High performance vented design
Built-in ARC room calibration
X-MONITOR technology
Remote control for X-MONITOR voices selection and measurement process control
iLoud Precision macOS & Windows control software
The system can auto-calibrate its in-room frequency response thanks to the built-in ARC3 room correction
system and the measurement microphone connected to the speaker.
The response of the system can also be manually contoured by a set of push buttons on the back.
The system can also emulate the sound of various listening devices, including other studio monitors, TV sets,
portable devices, car stereos, and so on, thanks to the X-Monitor functionality.
The system can be remotely-controlled with the use of a small wired remote controller (sold separately)
equipped with four illuminated pushbutton switches. The functionality of these switches is factory assigned to
four X-Monitor "voices" and can be modified with the control software.
Both the ARC custom response and the X-Monitor target responses are stored and processed in the speaker as
IIR filters. This keeps at minimum the memory footprint of the responses and allows for a lightweight processing
requirements even for high resolution at low frequencies: this is especially important considering the system runs
at 96 kHz.
The system can also be controlled by free remote control software (for macOS and Windows) when the iLoud
Precision is connected via USB to a computer.
9
