Idiomas disponibles
Idiomas disponibles
Disclaimer and Warning
Carefully read this entire document and all safe and lawful practices provided before use.
Introduction
The DJI
TM
Video Receiver features DJI O3 Pro video transmission and receives video signals
from the transmitter. In an environment without interference or obstruction, the video receiver
provides video transmission with a maximum transmission range of 6 km*, a bitrate of up to
40 Mbps, and a minimum end-to-end latency of 70 ms. It supports multiple frequency bands in
both Control and Broadcast modes and simultaneously outputs multiple video signals to display
devices for remote monitoring. When used with the DJI Video Transmitter or DJI Ronin 4D Video
Transmitter, the video receiver can meet the filming requirements of mediums such as movies,
TV series, advertisements, and documentaries.
* Measured with the video transmission control system in Control mode (Broadcast mode in the transmitter
device disabled) in an unobstructed environment free of interference with FCC compliance.
11
10
9
1.
Detachable Antennas
Transmit the wireless signal.
2.
Color Marks
Used to identify the receiver and transmitter. The receiver is identified by the red color
marks. Users can also place the different colored stickers included in the package on the
devices for identification.
3.
Linking Status Indicator
Shows the connection status between the receiver and transmitter. Refer to the Linking
section for more information on blinking patterns.
4.
Video Status Indicator
Indicates if there is a video signal transmitted from the transmitter to the receiver. Solid
green indicates there is a video signal transmission, while solid red indicates no video signal
transmission.
1
2
3
9
4
5
12
6
19
7
8
13
14
15
16
18
17
5
