Idiomas disponibles
Idiomas disponibles
Menu
On the home screen, press the menu dial on the video receiver to enter the menu and perform
the following configuration and operations. Turn or press the dial to select or confirm settings
in the menu. Press the back button to return to the previous screen.
Connect
Channel
Device Number
Fan Mode
Type-C Function
Low Latency
Language
Device Info
12
Select Control mode or Broadcast mode. When Control mode is
selected, it is required to set the device in use to Control A or Control B.
In Control mode, view the signal quality of each channel and select the
channel.
In Broadcast mode, view the signal quality of each channel only to
assist channel selection in the transmitter device.
This menu will appear only in Broadcast mode. The last search results
in Broadcast mode will be displayed after entering the menu. Switch
between devices or refresh the search results.
Set the fan mode to Standard or Low Noise.
If Low Noise is selected, the fan mode will switch to Standard
automatically when the temperature of the device is too high.
Select USB when using the USB-C port for the firmware update in DJI
Assistant 2.
In Control mode, set the Type-C function on both the transmitter and
receiver to Voice Call and connect headphones with a built-in mic to the
USB-C ports to enable voice calls between the transmitter and receiver.
Use the volume buttons on the headphones to adjust the volume for
voice calls.
View the compatible headphones on the FAQ page of the product
page on the official DJI website. Other 48kHz/16bit digital headphones
are also supported.
When enabled, the frame rate is converted to 60fps.
Select the system language in the language list.
View information such as the device SN and firmware version.
