Seiko SII IP-6620 Guía De Consulta Rápida página 30

Operation panel
The keys, LEDs and LCD are placed on the printer's operation panel as shown below. In addition, the operation panel is also
equipped with a buzzer to draw attention in case an error occurs or an invalid key is pressed.
• LED
ON, blinking and OFF indicate the
status of the printer.
• LCD
It shows the status of the printer and
displays the menu window (2 rows, 20
characters).
• Buzzer
Sounds when an error occurs or an
invalid key is pressed, and warns of daily
maintenance and when the print heads
are uncapped.
Indicates whether an error has occurred.
ON: An error has occurred.
Error LED
Blink: Warning state.
(Orange) OFF: Normal (no error)
Indicates the status of the media heater.
- ON: The set temperature has been reached
- Blink: Currently heating
Media heater LED
- OFF: Media heater is off
(Green)
Indicates whether ink is remaining.
ON: Ink of all colors is present.
Ink LED (Green) Blink: Ink near-end (The level of any color is low.)
OFF: No ink.
Indicates the online, offline, data reception, and
pause status.
ONLINE LED
- ON: Online
(Green)
- Blink (slowly): In pause
- Blink (fast): Data reception
- OFF: Offline
SET
ORIGIN
CANCEL
HEATER
ADJUST
NOZZLE PRINT
LED
• Up, Down, Left, Right keys
Used to select menu options, switch
between menus (selection, increasing/
decreasing values), etc.
• OK key
Used to confirm the menu and
parameters.
ONLINE
MENU
• Keys
Use these keys to operate the menu of
the printer.
MAINTENANCE
Refer to the table below.
PH.RECOVERY
• Power switch
Used to turn on or off the power of the
printer.
POWER
Keys
Cancels entered parameters or returns back to the
CANCEL
upper menu.
Switches between online and offline states, and
ONLINE
puts the printer in pause or resumes printing.
Enters heater control menu.
HEATER
Used to display information about the printer and
MENU
change printer settings.
Used to enter the adjustment menu.
ADJUST
MAINTENANCE Used to enter the maintenance menu.
Used to perform a nozzle print.
NOZZLE PRINT
Used to enter the cleaning menu.
PH.RECOVERY
29